Amazon Fire TV is a world-renowned device that is used to watch a wide range of TV shows and movies. If you are using Amazon Fire TV, and are facing certain issues in the same, then go through below-mentioned troubleshooting guide in order to get rid of those issues.
Amazon Fire TV is an electronic device that is prone to all sorts of issues. If you come across any issue with this device, then you must get in touch with Amazon Fire TV Support. Whatever your problem is, it is going to get resolved by the support facility.
Issue 1 : Amazon Fire TV is not turning on
If Amazon Fire TV not working at all, and is not even turning on, then,
Check whether the white indicator light is on or not.
You have to make sure that the power cord is plugged in correctly. It should be properly tightened.
Check if there is any damaged power cord
If after checking the power cord, Amazon Fire TV doesn’t turn on, you might have damaged the power cord. You need to check for any wears and tears in the power cord. You can easily fix any damage that is done to the power cord. What you need to do is, replace the power cord.
Issue 2 : No image shown on the screen
If you find no image on your TV screen, then
Check whether the HDMI cable is connected correctly or not.
If the HDMI cable is not connected properly, then the problem of not seeing any image could arise. Keep in mind that you have to connect the HDMI cable properly. If it is loose, then such problems can appear. If you are using Fire Stick and face the same issue, then you need to call Fire Stick support.
Check if TV HDMI port has become inoperative
If the HDMI port of your TV has become inoperative, then you need to unplug and wait for a few seconds. After that, re-plug the HDMI cable. If the issue doesn’t get resolved, then you will have to plug the HDMI cable into another port of the TV. If the problem gets resolved, then that’s great, if not, then you need to take Fire TV Support.
Check if the screen resolution that you have chosen is incorrect
You need to press ‘up’ and ‘rewind’ button on Amazon Fire TV remote for 5 seconds. With this, the device is going to go through all the possible resolutions from 480p to 1080p. You can select the resolution that you want to see your favorite content in.
Issue 3 : Amazon Fire TV HDMI port has been damaged or become inoperative
HDMI issue doesn’t occur too often, but when it does, it becomes very difficult to get rid of it. You need to check below-mentioned things in order to identify the issue.
Amazon Fire TV remote control not working
Amazon Fire TV doesn’t work despite trying all the things. If that’s the case, then you need to replace the existing batteries with new ones.
Issue 4 : Amazon Fire TV not responding
If the issue persists after replacing the batteries, then you will have to reset the device. For this, you need to unplug the power cord from the device and wait for a few seconds before plugging the power cord back in.
Buttons Panel of your remote control has been damaged
If the remote control buttons panel has been damaged, then you can easily replace it with a new one.
Motherboard of remote control has been damaged
If you have tried all the steps to fix the remote control, yet the problem persists, then you need to have your motherboard checked and replaced with a new one. If you need any assistance, then you can take Fire Stick Help because they provide the best assistance regarding such issues.